Forklift tynes, also called forks or tines, are the load-bearing arms on the front of the forklift. They are not one-size-fits-all; selecting the correct tynes requires matching the ITA class, dimensions, and capacity to your specific forklift and application. This guide covers types, key specifications, pricing, and where to buy in 2026.
ITA Fork Classes – The Foundation of Compatibility
Tynes are categorized by ITA (Industrial Truck Association) carriage class, which corresponds to the height between the top and bottom bars of the forklift‘s carriage. Your tynes must match your forklift‘s carriage class.
Class Carriage Height Typical Forklift Capacity
Class I 13″ Up to 1,999 lbs
Class II 16″ 2,000 – 5,500 lbs
Class III 20″ 6,000 – 10,000 lbs
Class IV 25″ 10,000 – 17,500 lbs
Class V 28.67″ 17,500 – 24,000 lbs
To identify your class, measure the distance from the top of the top carriage bar to the bottom of the bottom carriage bar.
Tynes Dimensions – Thickness × Width × Length
Tynes dimensions are expressed in the order: Thickness × Width × Length.
Dimension Description Common Sizes
Thickness Measured along the heel or shank 1½″, 1¾″, 2″, 2½″
Width Measured across the face of the blade Class II: 4″; Class III–IV: 5–6″
Length Measured from tip to the front face of the heel 36″, 42″, 48″, 54″, 60″, 72″
Rule of thumb: Tynes should extend at least two-thirds the length of the load to ensure stability and safety.
Hook-Type (ITA) vs. Pin-Type Tynes
Type Description
Hook-Type (ITA) Most common standard. Hooks at top and bottom latch onto carriage bars. Interchangeable between forklifts of the same carriage class
Pin-Type No standard shape or size. Varies by OEM and truck model. Requires precise dimensional data for replacement
Specialized Tynes Types
Type Application
Standard Tapered Tynes Most common; wider base tapering toward the tip
Block / Brick Tynes Narrow tynes used in multiples to handle concrete blocks
Lumber / Plywood Tynes Full-tapered and polished for lumber handling
Gypsum Tynes Padded blades for delicate handling of wallboard
Big Bag Tynes Carriage-mounted tynes for lifting and moving bulk bags
Moffett Mounty Tynes Specialized tynes for truck-mounted forklifts
2026 Pricing Guide
Prices vary significantly by class, capacity, length, and whether new or used. All prices are per pair unless noted.
New ITA Tynes
ITA Class Capacity Length Price (USD) Source
Class II 5,000 lbs 42″ $839.99 Northern Tool
Class II 5,000 lbs 48″ ~$840 Northern Tool
Class II 5,000 lbs 39″ $475.91 Crown Equipment
Class III 6,000 lbs Various From $581.74 Crown Equipment
Class III 6,000 lbs 42″ $910.95 Parts ASAP
Class IV 10,000 lbs 60″ $1,597.95 Parts ASAP
New ITA Tynes (Australian Pricing, AUD)
ITA Class Capacity Length Price (AUD) Source
Class 2 1,900 kg 1,070 mm $300 Forklift Tynes
Class 2 2,500 kg 1,220 mm $360 Forklift Tynes
Class 3 4,100 kg 1,220 mm $520 Handling Gear
Class 4 8,220 kg 2,440 mm $2,660 Materials Handling Equipment
Used Tynes
Description Price (USD) Source
Yale GLC040 42″ forks only $400 Vander Haag‘s
Cat VC60D 42″ carriage + forks (top bent) $484 Vander Haag‘s
Yale GLP060ZG 46″ × 8″ forks with carriage $484 Vander Haag‘s
Bolzoni Class 2A 80×40×1100mm (per pair) $300 Inside Waste
Note: Used tynes may have surface rust, be bent or damaged, or have missing locking clamps and brackets. Always inspect thoroughly before purchasing.
Where to Buy Forklift Tynes
Channel Examples Notes
Online Retailers Northern Tool, Grainger, FinditParts New tynes with warranties; shipping available
Specialty Fork Suppliers Forge Claw (Star Industries), Fork-Co, Crown Equipment ITA Class 2–4 tynes; heat-treated forged steel
New/Used Equipment Dealers Vander Haag‘s, Construction Equipment Guide New and used tynes; 12 Midwest locations
B2B Platforms Made-in-China, Bossgoo, TradeKey Factory-direct pricing; verify seller credentials
Specialist Tynes Retailers Forklift Tynes (Australia), Handling Gear, Materials Handling Equipment Class 2–4 tynes; same-day pickup in major Australian cities
Auction Platforms Grays, Pickles, Inside Waste Used tynes; sold as-is
Buying Considerations
Match the ITA class – Measure your carriage height or check your forklift‘s data plate. Using the wrong class means tynes won‘t fit.
Verify capacity – Tynes capacity must meet or exceed your maximum load weight. Never exceed rated capacity. Capacities range from 1,900 kg (Class 2) to 8,220 kg (Class 4).
Confirm dimensions – Thickness, width, and length must suit your loads and pallets. Standard lengths range from 1,070 mm (42″) to 2,440 mm (96″).
Check mounting type – Hook-type (ITA) is most common and interchangeable within the same class. Pin-type varies by OEM and requires precise measurements.
New vs. used – New tynes offer full warranty and certified load ratings. Used tynes offer significant savings but inspect for bends, cracks, rust, or excessive wear.
Material quality – Premium tynes are made from high-strength forged steel with heat treatment (minimum yield strength 825 MPa) and comply with ISO2328, ISO2330, and ANSI ITSDF B56.11.4.
Shipping – Tynes are heavy and bulky. Factor in freight costs and lift gate service for delivery.
Summary
Forklift tynes are available in five ITA classes (I–V) based on carriage height and capacity. Standard dimensions are expressed as thickness × width × length (e.g., 1¾″ × 4″ × 42″). Prices range from approximately $300 for used Class 2 tynes** to **$2,660+ for new Class 4 heavy-duty tynes. Purchase through online retailers (Northern Tool, Grainger), specialty suppliers (Forge Claw, Fork-Co, Crown Equipment), used equipment dealers (Vander Haag‘s), B2B platforms (Made-in-China), or auction platforms (Grays, Pickles). When purchasing, always match the ITA class, verify capacity, confirm dimensions, and inspect used units thoroughly for wear or damage.