Xin Hong Guang Group

Get Quote

Providing you with high-quality products and services

Home page Industry News

Forklifts of the Americas: A Leading Used Equipment Wholesaler

Published time：

2026-06-18

Author：

Xin Hong Guang

Source：

Xin Hong Guang

Abstract

Forklifts of the Americas is a prominent used material handling equipment wholesaler and dealership based in Ohio. The company specializes in buying and selling all makes and models of used equipment, catering to a wide range of industrial needs across the Western Hemisphere.Company OverviewHeadquarters: 18976 Cranwood Parkway, Cleveland, OH 44128. The company is also associated with Warrensville Heights, OH.Leadership: The CEO is Henry Alvarado, and the CFO is Samuel Benavides.Company Size: Forklifts of the Americas is a private company. Estimates of its size vary, with some sources indicating around 10 employees and annual revenue of approximately $3.8 million, while others suggest fewer than 10 employees and revenue under $1 million.Incorporation: The company was incorporated in 2012 in Florida.Products and ServicesForklifts of the Americas offers a diverse range of used material handling equipment:Forklifts: They stock a variety of forklifts from top brands like Toyota, Hyster, and

Forklifts of the Americas is a prominent used material handling equipment wholesaler and dealership based in Ohio. The company specializes in buying and selling all makes and models of used equipment, catering to a wide range of industrial needs across the Western Hemisphere.


Company Overview

Headquarters: 18976 Cranwood Parkway, Cleveland, OH 44128. The company is also associated with Warrensville Heights, OH.


Leadership: The CEO is Henry Alvarado, and the CFO is Samuel Benavides.


Company Size: Forklifts of the Americas is a private company. Estimates of its size vary, with some sources indicating around 10 employees and annual revenue of approximately $3.8 million, while others suggest fewer than 10 employees and revenue under $1 million.


Incorporation: The company was incorporated in 2012 in Florida.


Products and Services

Forklifts of the Americas offers a diverse range of used material handling equipment:


Forklifts: They stock a variety of forklifts from top brands like Toyota, Hyster, and Yale.


Specialized Equipment: The company has a strong focus on narrow aisle equipment but also carries pneumatic and cushion tire forklifts, aerial lifts, and light construction equipment.


Other Material Handling Solutions: Their inventory includes pallet jacks, reach trucks, and order pickers.


In addition to sales, they provide several key services:


Purchase, Lease, and Rental: Equipment is available for purchase, lease, or rental.


Maintenance and Repair: They offer ongoing support to keep equipment in optimal working condition.


Operator Training: They provide training programs emphasizing safety and efficiency.


Equipment Storage: Convenient storage options are also available.


Global Reach and Accessibility

The company ships equipment reliably throughout the western hemisphere. To serve a diverse clientele, Forklifts of the Americas has bilingual staff, particularly Spanish speakers, to bridge communication gaps.

Keywords：
forklifts of the americas
Previous article：NoneForklifts in New Zealand: Dealers, Regulations, and Market OverviewNext article:Forklifts for Sale: 2026 Market Overview
Recommended

Forklift Gears: The Complete Guide to Power Transmission

Forklift gears are the mechanical components that transfer power from the engine or motor to the wheels, enabling the forklift to move, turn, and handle loads. Without gears, a forklift's engine would spin uselessly, unable to convert its rotational energy into useful work. Understanding the types of gears, how they work, and how to maintain them is essential for any operator or fleet manager.How Forklift Gears WorkA forklift's transmission is a set of gears, including a change gear and a drive shaft, by which power is transmitted from the engine to the wheels. The main job of a transmission system is to let the engine operate at narrow ranges of speed while providing a wider range of output speeds. When the engine operates at varying revolutions per minute (RPM), the transmission provides conformity between engine rotation and wheel rotation, keeping them in balance.Drive components transfer mechanical energy from the power source into motion, adjusting the engine's RPM to

2026-06-18

Forklift Fuel Efficiency: A Complete Guide to Costs and Savings

Fuel efficiency is one of the most significant factors in the total cost of owning and operating a forklift. Unlike the upfront purchase price, fuel costs accumulate over the life of the machine and can represent a substantial portion of your operating budget. Understanding the fuel efficiency of different forklift types, what affects consumption, and how to improve it can save your operation thousands of dollars annually.Fuel Efficiency by Power SourceElectric ForkliftsElectric forklifts are the clear winner in fuel efficiency. Electric motors convert over 90% of their energy into useful work at nominal power, compared to just 40–45% for modern diesel combustion engines. This efficiency advantage translates directly into lower operating costs.A diesel engine wastes more than half its fuel energy as heat and exhaust, while an electric motor puts nearly all its energy into moving the forklift and lifting loads. In real-world terms, electric forklifts are typically £1.5 to £3 per hour ch

2026-06-18

Forklift Forks Sizes: The Complete Guide to Dimensions and Classes

Forklift forks, also known as tynes or blades, are not one-size-fits-all. They come in a variety of sizes and are classified by the Industrial Truck Association (ITA) to ensure compatibility with your forklift's carriage and load requirements. Choosing the right size is critical for safe and efficient operation.The Three Key DimensionsFork dimensions are typically expressed in the order: Thickness × Width × Length. A standard fork size, for example, is 1 ½″ × 4″ × 42″.1. Fork ThicknessWhat it is: Measured along the heel or the vertical part of the fork (the shank).Why it matters: Thickness directly relates to the forklift's lifting capacity. Heavier loads require thicker forks.Common sizes: 1 ½″, 1 ¾″, 2″, and 2 ½″.2. Fork WidthWhat it is: Measured across the face of the blade or heel.Why it matters: Width provides stability and support for the load.Common sizes by class:Class II: Typically 4 inches wide.Class III & IV: Typically 5 and 6 inches wide, respectively.3. Fork Length

2026-06-18

Forklift Fork Width Adjustment: A Complete Guide

Adjusting the width between forklift forks is a fundamental operation required to safely handle different pallet sizes and load types. Proper fork spacing ensures load stability, prevents product damage, and reduces the risk of tip-overs. There are two primary methods for adjusting fork width: manual adjustment and hydraulic adjustment using a fork positioner attachment.Manual Fork Width AdjustmentMost standard forklifts allow manual adjustment of fork spacing by sliding the forks along the carriage bars. This method requires the operator to stop the forklift, exit the cab, and physically move the forks.Step-by-Step Manual Adjustment:Park the forklift on level ground and engage the parking brake.Remove the load from the forks before making any adjustments.Locate the locking pins or bolts securing each fork to the carriage. Some models use spring-loaded lock pins, while others use bolts that must be loosened.Lift the locking pin or loosen the bolt to release the fork from its fixed posi

2026-06-18

Forklift Fork Thickness: Standards, Classes, and Safety Limits

Forklift fork thickness is a critical specification that determines how much weight a fork can safely handle. It is measured along the vertical shank (the back of the fork) or at the heel (the curved area where the blade meets the shank). Thicker forks are required for higher lifting capacities and heavier loads.Standard Fork Thickness by ITA ClassFork thickness varies by ITA carriage class, which corresponds to the forklift's lifting capacity.ITA Class Carriage Height Capacity Range Typical Fork ThicknessClass I 13.03 inches Less than 2,000 lbs Less than 1.25 inchesClass II 16.00 inches 2,000 – 5,500 lbs 1.4 – 1.75 inchesClass III 20.00 inches 5,501 – 11,000 lbs 1.75 – 2.0 inchesClass IV 25.00 inches 11,000 – 17,500 lbs 2.0 – 2.5 inchesClass V 28.66 inches 17,500 – 24,000 lbs 2.0+ inchesClass II forks are the most common for standard warehouse forklifts. A standard Class II fork is typically 1.4" to 1.7" thick when brand new. The most common thickness overall is 1½ inches, with ot

2026-06-18

Forklift Fork Classes: The Complete Guide to ITA Fork Classifications

Forklift forks are classified according to the Industrial Truck Association (ITA) carriage class system. These standardized classes determine which forks will properly mount to your forklift's carriage and what loads they can safely handle. Understanding fork classes is essential for replacement forks, attachments, and safe operation.What Are ITA Fork Classes?ITA fork classes, also known as hook-type forks, are the most common fork mounting system in the material handling industry. They attach to the forklift carriage via top and bottom hooks that latch onto horizontal carriage bars, simplifying installation and replacement without the need for bolts. These forks are standardized under ISO 2328, ensuring compatibility across different forklift manufacturers.The 5 ITA Fork Carriage ClassesFork classes correspond directly to carriage classes. Each class is defined by carriage height and lifting capacity.Class Carriage Height Lifting Capacity Typical ApplicationClass I 13 inches Less

2026-06-18

Forklift Fork Clamp: The Versatile Attachment for Non-Palletized Loads

A forklift fork clamp is a specialized hydraulic attachment that replaces traditional forks to grip, lift, and transport non-palletized or irregularly shaped loads. Unlike standard forks that slide under a pallet, fork clamps use hydraulic or mechanical pressure to secure the load from the sides, allowing forklifts to handle items that are difficult or impossible to move with conventional forks. These attachments are commonly used on sit-down forklifts classified as Class I, IV, and V.How Forklift Fork Clamps WorkFork clamps operate by using hydraulic cylinders to close padded arms around a load, applying even pressure to prevent slippage or damage. The operator positions the clamp around the load, activates the clamping mechanism, and lifts. Modern hydraulic systems allow precise pressure control through adjustable valves, enabling operators to handle everything from fragile glass containers to heavy steel coils with the same equipment.Some fork clamps also offer side-shifting and rot

2026-06-18

Forklifts for Sale in China: The Complete 2026 Market Guide

China is not only the world's largest forklift manufacturer but also a massive domestic market with a vast inventory of new and used equipment. From 1.5-ton electric pallet stackers to 32-ton heavy-duty container handlers, the Chinese market offers a diverse range of forklifts at competitive prices. This guide provides an overview of what is available, the key brands, and what to expect when buying in China.Price Ranges by Equipment TypePrices in China vary widely based on power source, capacity, and condition. The table below summarizes real-world 2026 listings:Forklift Type Capacity Price Range (USD) Key SpecificationsTavol Diesel Forklift 2 – 5 tons ~$6,000 Japanese Isuzu/Xinchai engine, 3-5m lift height, CE certifiedGeneric Electric Forklift 2 – 2.5 tons ~$12,950 Lithium battery, 4.5-6m lift height, 48V system2026 DeWalt DDFP-25 2.5 tons ~$29,900 New model, LPG/diesel options availableEfork Double Deep Reach – ~$17,000 48V electric, narrow aisle operation30-32 Ton Container Han

2026-06-18

Forklift for 3PL: The Complete Guide

Third-party logistics (3PL) providers face unique material handling challenges that differ significantly from dedicated warehouse operations. Unlike a single manufacturer moving predictable loads, a 3PL must handle a constantly changing mix of products—different weights, dimensions, packaging types, and storage requirements—often for multiple clients under one roof. The right forklift strategy is not just about moving pallets; it is about maximizing throughput, minimizing downtime, protecting client goods, and maintaining the flexibility to adapt as customer needs evolve.The Forklift Types Every 3PL NeedsForklift operations are the heartbeat of a 3PL, supporting everything from inbound unloading to pallet putaway, replenishment, outbound staging, and trailer loading. The most effective 3PLs use a mix of equipment types, each chosen for specific workflows:Counterbalance Forklifts are the workhorses of the 3PL warehouse. These sit-down rider trucks handle the heaviest lifting—unloading t

2026-06-18

Forklift Extender: The Complete Guide to Fork Extensions

A forklift extender—more commonly known as a fork extension, forklift fork extension, or forklift tine extension—is a specialized attachment that slides over the existing forks of a forklift to increase their length. These extensions allow operators to handle larger, longer, or irregularly shaped loads that standard forklift forks cannot accommodate.What Forklift Extenders DoForklift extenders serve one primary purpose: they extend the reach of your forklift's forks, enabling the handling of oversized items such as long pallets, pipes, sheets of material, lumber, hay bales, and fencing. They are commonly used in warehouses, construction sites, lumber yards, farms, and logistics operations where bulky or oversized materials are handled.However, they do not increase the forklift's lifting capacity—in fact, they often reduce it. Fork extensions are designed for occasional, light-to-medium loads. For frequent heavy load handling, longer forks are a safer and more reliable option.Ty

2026-06-18